Downloading Images Using the RICOH Gate La

After installing the software on your computer, connect your camera to the computer.

1Make sure the camera power is off.

2Connect the USB cable to the USB port of your computer.

3 Connect the USB cable to the

USB terminal of your camera.

• Your camera turns on and the computer automatically reads the necessary files.

4RICOH Gate La starts and

image transfer begins automatically.

5When image transfer is completed, disconnect the camera and the computer. (GP.232)

Note ----------------------------------------------------------------------------------------------

For how to use RICOH Gate La, refer to the “Software User Guide” (PDF file) contained in the provided CD-ROM. (GP.225)

If image transfer does not begin, re-start your computer and perform Steps 1 to 5 again.

Caution------------------------------------------------------------------------------------------

Do not force the USB cable into the terminal.

Do not apply excessive force with the USB cable connected.

When using the USB cable, do not move the camera with the USB cable.

Downloading Images to Your Computer

6

229

Page 231
Image 231
Ricoh GX200 VF KIT manual 229, Downloading Images Using the Ricoh Gate La