Ricoh GX200 VF KIT manual With the camera ready to shoot, press the Fn1/Fn2 button

1

Various Shooting Functions

Switching from Color to Black-and-White or Black-and-White (TE) Mode (Color>B&W, Color>TE)

Assigning the Fn1/Fn2 button to [Color>B&W] or [Color>TE]

(GP.195) and then pressing the Fn1/Fn2 button with [Image Settings] set to a setting other than [B&W] or [B&W (TE)] allows you to switch from color mode to [B&W] or [B&W (TE)]. Pressing the Fn1/Fn2 button again returns to color mode.

1Set [Set Fn1/2 Button] to [Color>B&W] or [Color>TE] on the setup menu.

•For the operating procedure, see P.195.

2With the camera ready to shoot, press the Fn1/Fn2 button.

•The setting switches to [B&W] or [B&W (TE)] and an orange symbol is displayed on the screen.

•Pressing the Fn1/Fn2 button again returns to color mode.

Caution------------------------------------------------------------------------------------------

When [Image Settings] is set to [B&W] or [B&W (TE)] (GP.119, 120), pressing the Fn1/Fn2 button does not switch to color mode.

Note ----------------------------------------------------------------------------------------------

•Turning off the camera after switching to [B&W] or [B&W (TE)] returns the setting to color mode.

•You can also use the shooting menu to make the color setting. (GP.119, 120)

84