Note ---------------------------------------------------------------------------------------------------

Press the shutter release button gently to prevent camera shake.

The Jsymbol indicates that camera shake may occur. Hold the camera still and focus the camera again.

The flash fires a pre-flash to increase the AE (Auto Exposure) accuracy (except when the flash mode is set to [Manual Flash] GP.51).

You can set the time the still image you have taken appears on the picture display. You can also make settings to have the image remain displayed until the shutter release button is half-pressed or not to display the image after shooting. (GP.208)

If you are using the camera for the first time, read this section.

47

Page 49
Image 49
Ricoh GX200 VF KIT manual