Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the rear of your sound system to permit an audio signal to be fed into the unit from an external audio device such as iPod, MP3 or CD player.

1.Repeatedly press and release the Radio button until “AUX IN” is displayed.

2.Connect an external audio source (for example, iPod, MP3 or CD 1 player) to the Auxiliary input socket.

3.Adjust the volume setting on your iPod, MP3 or CD player if necessary to ensure an adequate signal level, and then use the Volume Up or Down buttons on the sound system as needed for comfortable listening.

Line Out socket

A 3.5mm stereo Line Out socket is provided on the rear of your sound system to permit the audio signal to be fed to an external amplifier or other audio device.

Inserting an audio cable into this socket will not mute the internal loudspeaker. Set the volume control to a low level if desired (minimum level = 1). Setting the volume to MIN may cause the line output to be muted.

42

Page 44
Image 44
Apple DDR-43+ manual Auxiliary input socket, Line Out socket