Apple 3400C/200 Switch off system and hold trackpad button down while you, Disk does not eject

		Troubleshooting		Symptom Charts/Floppy Drive - 17
			1	Switch off system and hold trackpad button down while you
	Disk does not eject
			2	switch system on.
				Eject disk manually by carefully inserting opened paper clip
			3	into hole near floppy drive slot.
				Check floppy drive cable connection.
			4	Replace floppy drive cable.
			5	Replace floppy drive.
			6	Replace logic board.
Disk initialization			1	Try known-good floppy disk.
fails			2	Check floppy drive cable connection.
			3	Replace floppy drive cable.
			4	Replace floppy drive.
			5	Replace logic board.