5Using Phillips #1 screwdriver, loosen 2 captive screws securing card’s bracket to enclosure.
6Remove bracket from enclosure.
Note: Card is held in place by retention bar. Following two steps explain how to release bar.
7Press button on PCI slider.
8Move slider to left, which releases card’s retention bar.
9Holding card by top corners, gently pull up and remove card from computer.
Note: When removing or installing card, handle it only by the edges. Do not touch its connectors or any components. Lift card straight out from connector to remove it, and insert it straight into connector to install it.
© 2009 Apple Inc. All rights reserved. |
