Apple MMC-96IRS manual Inactive brightness control

Inactive brightness control

The brightness of the display when the unit is in switch-on mode may be adjusted. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting.

1.Press the On / Standby button to switch on the cradle.

2.Press and hold the Menu button so that the display shows

“Set Brightness” on the lower line of the text display.

3. Press and release the Select button to show the current setting.

4.Press and release the Fast-forward or Rewind buttons to change the inactive brightness level. The backlight level will change at the same

time so that you can see the effect of the change.

5. Press and release the Select button to save the new setting.

The default setting after a system reset is 5. Possible brightness values range from 1 - 7.

GB

20