Apple Network Setup manual 129

C H A P T E R 4

Network Setup Protocol Structures and Data Types

flashConnectedIcon Set to zero if the menu bar flashes when a disconnection occurs; set to 1 if the menu bar does not flash when a disconnection occurs.

issueConnectedReminders

Set to 1 to flash an icon in the menu bar to remind the user that the connection is active; set to zero to not flash an icon.

reminderMinutes	If Notification Manager reminders are enabled, the number
	of minutes that are to elapse between reminders.
connectManually	Must be zero.
allowModemDataCompression
	Set to zero if modem data compression is not allowed; set
	to 1 if modem data compression is allowed.
chatMode	The chat mode. For possible values, see the
	OTCfgRemotePPPConnectScript (page 166) enumeration.
serialProtocolMode The serial protocol mode (PPP, ARAP, or both). For
	possible values, see the OTCfgRemoteProtocol (page 167)
	enumeration.
passwordPtr	Run-time use only. Initialize passwordPtr to zero, ignore it
	when you read it, and preserve its value when you write it.
userNamePtr	Run-time use only. Initialize userNamePtr to zero, ignore it
	when you read it, and preserve its value when you write it.
addressLength	The length in bytes of the telephone number stored in the
	kOTCfgRemoteAddressPref.
addressPtr	Run-time use only. Initialize addressPtr to zero, ignore it’s
	value when you read it, and preserve it’s value when you
	write it.
chatScriptName	The user-visible name of the chat script for this
	configuration.
chatScriptLength	The length in bytes of the chat script.
chatScriptPtr	Run-time use only. Initialize chatScriptPtr to zero, ignore
	it’s value when you read it, and preserve it’s value when
	you write it.
additionalPtr	Run-time use only. Initialize additionalPtr to zero, ignore
	it’s value when you read it, and preserve it’s value when
	you write it.

useSecurityModule Must be zero. securitySignature Must be zero.

Protocol Structures 129