Apple Network Setup manual OTCfgRemoteServer, configCount, configIDs1

C H A P T E R 4

Network Setup Protocol Structures and Data Types

struct OTCfgRemotePassword { UInt8 data[256];

};

typedef struct OTCfgRemotePassword OTCfgRemotePassword;

data	The encrypted password. Call OTCfgEncrypt (page 93) to
	encrypt the password.

The preference type for this preference is kOTCfgRemotePasswordPref, which is defined as 'pass'.

OTCfgRemoteServer

The OTCfgRemoteServer structure stores an array of port configuration IDs used to locate the configuration for a particular port.

struct OTCfgRemoteServer {

UInt32	version;
SInt16	configCount;
SInt16	configIDs[1];

};

version	Depending how the preference was constructed, version
	may be kOTCfgRemoteDefaultVersion or
	kOTCfgRemoteAcceptedVersion. When reading the version
	field, accept either value. When writing the version field,
	set it to kOTCfgRemoteDefaultVersion.
configCount	The number of active Remote Access server configurations.
	Must be 1 for the personal server.
configIDs	Array of port configuration IDs. For the personal server,
	there can be only one port configuration ID whose value is
	zero.

The preference type for this preference is kOTCfgRemoteServerPref, which is defined as 'srvr'.

136Protocol Structures