OPT. (OPTION) Menu

The OPT. Menu allows you to adjust the Communication Function* (COM. SPEED and COM. BITS), enabling you to control the projector from a computer. The OPT. Menu also allows you to set the TIMER , select the LANGUAGE for all on-screen displays, activateAUTO OFF and START UP.

OPT. (OPTION)

Menu Options

Details about Selection Options

Selects data speed of transmission:

COM. SPEED

1200, 2400, 4800, 9600, 19200.

(COMMUNICATION) (Used for computer control of projector)

Selects data transmission format:

COM. BITS

7N1...7 data bits, No Parity, 1 Stop bit

TIMER

8N1...8 data bits, No Parity, 1 Stop bit (Used for computer control of projector.)

A countdown timer (up to 99 minutes) you can activate whenever needed. The time remaining displays at bottom of the projected picture.

Selects language of On-View menus: English, Francais (French), Deutsch

LANGUAGE (German), Espanol (Spanish), Italiano (Italian), Norsk (Norwegian), Nederlands (Dutch)

Sets time (up to 99 minutes) the lamp will automatically turn off and the

AUTO OFF projector will switch to Standby Mode if an input source is not detected. To

START UP

disable AUTO OFF, set minutes to 0.

Toggles on/off the "ViewSonic® See the Difference" start-up screen (which is displayed each time the projector is powered on).

IMPORTANT: If AUTO OFF is activated and shuts off the projector lamp, wait at least one (1) minute. Then press--and briefly hold--the STANDBY/ON button. The lamp will turn back on.

*NOTE: Computer control of the projector (communication function) is an advanced feature that requires specialized software not included with the PJL855. To develop this software you will need various control codes and other suplementary information availaible from ViewSonic Customer Support. (See the back of this guide for contact information.)

ViewSonic PJL855

Operation

 

11