Getting Started

Congratulations on purchasing a ViewSonic PJL855 Office TheaterTM LCD projector! Save the original box and all packing material for future shipping needs.

Package Contents

•ViewSonic PJL855 Office Theater

•Remote Control Unit/Mouse & Laser Pointer

•2 AA batteries

•3 AC power cords (U.S., Europe, and China)

•Computer video cable (15-pin mini D-sub connector)

•Video/Audio cable (RCA connectors)

•S-Video cable (RCA connectors)

•Audio (stereo) mini-DIN cable

•PS/2 mouse cable

•Serial (RS232) mouse/computer-control cable

•ADB (Macintosh®) mouse cable

•Macintosh adaptor

•User’s guide

•INF and ICM files on CD-ROM*

•Carrying Case

*IMPORTANT: The supplied INF file assures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. When using a computer as the signal source, ViewSonic® recommends that you install both of these files.

•Insert the supplied CD-ROM into your system, wait for it to auto-start, select “Monitor Drivers,” and follow the on-screen instructions.

Installation

1 Connect signal input cables

3 (continued)

With both the PJL855 and the com-

When a PC is one of the input

puter powered OFF, connect the

devices (not for Macintosh®):

appropriate video and audio cables

(1) Install INF and ICM files

to the computer, VCR, or other

See intructions in the

input sources.

"IMPORTANT" note above.

Macintosh® users: Connect the

(2) Set signal timing of

supplied Macintosh adapter to the

graphics card

video cable, then to the PJL855.

Set the graphics card(s) to

2 Connect power cord

800 x 600@75Hz

Connect the power cord to a

(resolution and refresh

rate).

properly grounded AC outlet, then

to the PJL855.

4 Install batteries into

3 Power-ON projector and all input

Remote Control Unit

devices (computer,VCR, etc.)

See intructions below.

• Power-ON the PJL855 projector.

 

• Power-ON all input devices.

 

 

 

To be best prepared for any future customer service needs:

•Write the serial number (see the bottom of the projector) in "For your Records" on page 1 of this guide.

•Register the warranty of your projector on the Internet at:

http://www.viewsonic.com

Inserting Batteries into the Remote Control Unit

1 Remove the compartment cover by sliding it in the direction of the arrow shown below.

2Insert the batteries (Alkaline type) with the polarities (+,-) facing the direction shown below.

3Replace the compartment cover.

CAUTION:

•Only use AA (LRG) type of batteries.

•To prevent leakage that may damage the unit, do not combine old and new batteries.

•When inserting batteries, be careful to insert them according to the correct polarities (+,-).

•If not using the Remote Control Unit for an extended period of time, remove the batteries.

4

 

Getting Started

ViewSonic PJL855