SEQUENCER:
To regulate dwell time of the sequencer, you can use the “^” button 
and the “v” button 
to select dwell time provided here, ranging from the "00" to the "30".you can set individual channels in different dwell time. After set individual channels, quad and multi screen in different modes and then push the Enter button 
. At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button 
and the “>” button 
to confirm either "OK" or "CANCEL" respectively. Press "OK" to ratify your choice(s). If not, press "CANCEL".
5.4 ALARM SETTING
This menu allows users to program the configuration of alarm recording only when an alarm input is activated. The device will record as long as the alarm input is activated.
MAIN MENU
LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK
SYSTEM
GOTO ALARM PAGE
ALM OPERATION:
ALARM SETTING
ALM OPERATION | : OFF |
ALM DURATION | : 30 SEC |
MAX REC RATE | : UNLIMIT |
PRE- ALARM | : ON |
MAIN PAGE
ALARM REC ENABLE
This option determines whether to activate/deactivate the alarm recording when it detects an alarm input. ON: The device activates the alarm recording when it detects an alarm signal from LANCAM. OFF: The device ignores the alarm signal when it detects an alarm signal from LANCAM.
ALM DURATION:
This option allows users to set alarms for a certain duration. You can select one of the six following options: 0 SEC, 30SEC, 1 MIN, 5 MIN, 10 MIN, and
Duration Set ting
|
| Alarm recording |
|
| |
|
|
| Duration |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Alarm | Alarm |
|
| ||
activated | deactivated |
|
| ||
Alarm recording |
|
| |||
|
|
|
| ||
|
|
| Duration |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Alar m | Alar m |
| Reset | ||
activated | deactivated |
|
| ||
42
