Approach Tech NVR-2018 manual Install the Network Viewer for the ZIP file

Physical specification for Ethernet

Wire Type	Cat. 5
Connector Type	RJ-45
Max. Cable Length	30 m
Hub Wiring Configuration	Straight Through
PC Wiring Configuration	Cross Over

NOTE: For more details on network connections, please refer to the following document.

9.1.2Install the Network Viewer in your PC

Install the Network Viewer from the supported CD-R.

1.Exit all applications currently running in the selected PC.

2.Insert the supported CD in the CD-ROM drive. The program will execute the installation automatically. Follow the on-screen instructions to proceed with the rest of the installation procedure as they appear.

3.After the installation is complete, pop up the START menu from your computer, and point to Programs

/APPRO NVR Network Viewer to open up the program selection page as shown below. Click the APPRO NVR Network Viewer tag to start the APPRO NVR Network Viewer program.

Install the Network Viewer for the ZIP file.

1.Save the ZIP file to your PC and extract the file to a designated directory.

2.Open the extracted folder.

3.Click on the icon to execute the installation and then follow the on-screen instructions to proceed with the rest of the installation procedure as they appear.

4.After the installation is complete, pop up the START menu from your computer, and point to Programs

/APPRO NVR Network Viewer to start the APPRO NVR Network Viewer program.

NOTE: Please make sure the TCP/IP communication software has been properly set and configured in your computer. To check your TCP/IP settings, refer to the following document.

59