Model 65 Humidifier Control
Installation Instructions
READ AND SAVE THESE INSTRUCTIONS
The Model 65 is for use with any humidifier requiring an ON/OFF signal for a 24 volt circuit.
Safety Instructions
WARNING
1.Improper installation may cause property damage or injury. Installation, service, and maintenance must be performed by a qualified service technician.
2.120 Volts may cause serious injury from electric shock. Disconnect electrical power before starting installation or servicing. Leave power disconnected until installation/service is completed. This control is not a 120 Volt (line voltage) device.
CAUTION
1.Read all instructions before beginning installation.
2.Do not adjust humidity
3.Do not use solvents or cleaners on or near the display and circuit board. Chemicals can damage components.
1