13. Power Meter | Control Knob set too low | Turn Control Knob up (clockwise). | ||
Improper salt level. The |
| |||
not responding, |
| |||
system automatically shuts down | Check salt level using a test kit or your local | |||
but On/Off light is | ||||
the Power Meter when the salt | pool professional. The salt level is likely at an | |||
on |
| |||
| level is extremely low or extremely | extreme level. Adjust accordingly. | ||
|
| |||
|
| high. |
| |
|
| Standard occurrence that | Clean Cell as instructed in the “Maintenance” | |
14. | Scale | needs to be cleaned approximately | ||
section. | ||||
twice/year. | ||||
| ||||
| Balance chemicals. (Focus mostly on the | |||
Cell |
|
| ||
| Chemical imbalance. | “Saturation Index” in the section titled | ||
|
| |||
|
|
| “Understanding the Chemistry”). | |
15. | White flakes in | Normal occurrence when Cell | Keeping the water well balanced reduces this | |
occurrence. (Focus mostly on the “Saturation | ||||
the water | ||||
cleans itself. | Index” in the section titled “Understanding the | |||
|
| |||
|
|
| Chemistry”). | |
|
|
| Make sure your filtration system is working | |
|
|
| properly (i.e. clean filter and/or skimmer). | |
|
|
| Make sure circulation time is adequate – | |
|
| May be due to chemical | increase pump time if not. | |
16. Cloudy water | Make sure total alkalinity is balanced. | |||
imbalance or low water flow | Shock the water to eliminate build up of any | |||
|
| |||
|
|
| organic matter. | |
|
|
| Make sure pool has free chlorine reading of | |
|
|
| 1.0 to 3.0 ppm | |
|
|
| Check with dealer for more information | |
|
|
| Have dealer test the pool water. If high in | |
|
| Metals in the fill water may | metals use a Metal out or Sequestering product at | |
17. Colored Water | ||||
have been oxidized. | ||||
Increase circulation time if needed and clean | ||||
|
| Algae may be trying to form. | ||
|
| the filter. | ||
|
|
| ||
|
|
| Check with your dealer for more information. | |
|
|
| Have your water tested for chemical balance | |
|
|
| including pH, phosphates, and nitrates. | |
|
| May be due to low chlorine | Use a nonmetallic (polyquat) algaecide per | |
18. Algae | the directions on the bottle and brush the sides of | |||
levels or a chemical imbalance | the pool often. | |||
|
| |||
|
|
| Clean the filter and shock the pool with | |
|
|
| chlorine daily until water clarity returns. | |
|
|
| Check with your dealer for more information. |
Our contact information is found on the front cover of this manual. For additional information, please visit our website. For warranty service, questions, or comments, please contact us directly. Technicians are available from 9:00 AM to 4:00 PM Eastern Standard Time, Monday through Friday. Please have the following information ready:
1.Model and Serial #
2.Date of installation
3.Installing company or dealer
4.Current salt level and chemical levels
5.Proof of Purchase (bill of sale, cancelled check, or some other appropriate payment record)
22