INSTALLATION AND OPERATING INSTRUCTIONS FOR AUTOMATIC INSTANTANEOUS TYPE WATER HEATERS FOR USE WITH NATURAL AND LIQUEFIED PETROLEUM GAS
MODEL 38B LP and NG (Non Modulating)
Suitable for water (potable) heating and space heating
Intended for low flow domestic hot water applications with steady cold water inlet temperatures
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable, combustible or corrosive vapors and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
- Do not try to light any appliance.
- Do not touch any electrical switch; do not use any phone in your building.
- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
- If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
TABLE OF CONTENTS
6 720 605 293 PT 862 (12.98)
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency or the gas supplier. Upon completion of the installation, these instructions should be handed to the user of the appliance for future reference.
Specifications | Page 2 |
Rules for safe operation | Page 4 |
Locating the Heater | Page 4 |
Combustion Air Requirements | Page 4 |
Mounting the Heater | Page 5 |
Venting the Heater | Page 5 |
Gas Connections | Page 6 |
Water Connections | Page 6 |
Safety before lighting the pilot | Page 7 |
Lighting instructions | Page 8 |
Setting water temperature | Page 8 |
Maintenance & Service | Page 9 |
Trouble Shooting | Page 10 |
Diagram of AquaStar | Page 13 |
Components and Parts List | Page 14 |
