Serenity studio 36
Serenity STUDIO Model # AI36AIR6642/AI36AIR6642TO (Tub Only)
Back Angle 25°
Deck |
|
|
| 27 1/2” |
| ||
|
|
|
|
|
|
| |
Width |
|
|
|
|
|
|
|
|
|
|
|
|
| 44” | |
3 1/2” |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deck Width
3 1/2”
65 3/4”
42”
42”
|
|
|
|
|
|
|
|
|
|
24” | 20 1/2” | |||
22”
3”
SPECIFICATIONS:
General Specifications:
Tub Size | 65 3/4” x 42” x 24” |
| 167 cm x 107 cm x 61 cm |
Bathing Well | 44” long |
| 27 1/2” wide |
| 21” interior depth |
Maximum Water Depth | 17” |
Shipping Weight | 188 lbs. / 85 kg |
Tub Weight Filled | 1072 lbs. / 486 kg |
Tub Only Weight | 104 lbs. / 47 kg |
Weight with Equipment | 114 lbs. / 52 kg |
Gallons to Overflow | 115 gal. / 435 L |
Electrical Specifications:
Blower/Heater | 1 HP; 10.5 AMP; 120V |
Requirement | 15 AMP; 120V, separate circuit |
| required protected w/ Class A GFCI |
Standard equipment:
Air Bath System:-80 Air Jets
-1 HP Variable Speed Air Blower with
-600 Watt Air Heating System
-Electronic Control Package with wave and pulse Features
-Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:-Chromatherapy
-Slip Resistant Floor
-Air Channels Lined with Antimicrobial Coating
-
-Durable, easy to clean, Lucite® Cast Acrylic Surface
-available in 8 Standard
optional equipment:
•Comfort Pillow - Oval or Rectangle
•
-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•Lift & Turn Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•Cable Drive Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit only)
•Waterproof Remote Control with infrared sensor and 25’ cord
•Remote Blower Wiring Kit
•Integral Tiling Flange (Customer must specify which side(s) should receive flange)
•Color Matched Acrylic Skirt
•Premium colors
Fax-On-Demand
Document # 1318
All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
