SAFETY PRECAUTIONS
Improper transportation handling or use of this housing might cause a flooding or malfunction.
Please read and follow the following precautions:
-Store and transport the housing in a sturdy, shock proof container and avoid travelling with the camera mounted inside the housing as impact forces especially on the external push buttons will be transferred to the camera.
-When travelling by air, either remove the port or open the housing.
-Never change a port or open the housing in a location where sand or similar foreign material might come in contact with an
-Use of accessories or modifications and alterations unauthorized by the manufacturer may result in flooding or poor functioning of the controls
-Be careful when opening the housing as the pressure build up inside the housing will exaggerate the force of the latch spring. Keep fingers away from the path
of the latches.
-Whenever changing ports or
-Avoid scratching the acrylic ports and windows.
-Make sure that all ports remain properly attached before rinsing the housing. Especially when rinsing without a strobe make sure the Bulkhead connector is sealed with its plug.
-Never attempt to operate the camera in auto focus mode with the lens mounted focus gear engaged with the housing gear.
-Remove the main
-Ensure that the spring loaded secondary lock is properly engaged to prevent the accidental opening of latches.
