CAMERA PREPARATION AND INSTALLATION
1.Set the Focus Mode Selector on the lens to the proper setting AF or MF if using a focus gear
2.Important Note: Small “D” Clips and strap attachments that are used for the camera strap must be removed or moved out of the way before closing the housing.
3.Remove the rubber eye cup from the camera before closing the housing
4.Carefully place the camera on the saddle and ensure the camera is properly installed and aligned as follows:
A)The camera is properly aligned and secured against rotation or movement. See picture A
B)Align the Tripod Socket of the camera with the mounting screw. Tighten the mounting screw securely, while ensuring that the camera position is not altered.
C)Slide and lock the tray in position and attach the hotshoe connector See picture B
Picture A: Camera saddle position
Picture B: Hot shoe cable position
Page9
