Arboria Pyramid Trellis manual A S S E M B L Y I N S T R U C T I O N S, Tools You Will Need

A S S E M B L Y I N S T R U C T I O N S	8
Pyramid Trellis

P L E A S E R E A D C O M P L E T E LY B E F O R E YO U B E G I N A S S E M B LY

CHECK BOX FOR THESE CONTENTS

1Solid Cedar Cap Piece (1)

2 Triangular Trellis Panels (4) 1

HARDWARE

- 1 5/8” Wood screws (28) 2

TOOLS YOU WILL NEED

•Phillips screwdriver (electric driver recommended)

PRELIMINARIES

IF YOU PLAN TO PAINT:

If you wish to paint or stain your trellis...

WORK AREA

A clean, flat work surface (floor, sidewalk, driveway or benchtop) is preferred for Step 1.

PLEASE NOTE: While screw holes are pre-drilled, there are no pilot holes in the wood into which the screws are to be driven. This is because cedar accepts screws very easily and we want to ensure that each screw gets maximum “bite”. Be sure to hold both pieces of wood firmly in position when starting each screw. Make sure you are driving them in straight, particularly into the edges of the corner

support pieces.445.35.41 8/04