Features:
1.Fully balanced signal from EQ unit to Crossover.2.Green dot matrix display remote controller for setting output levels, crossover range and configuration of control unit.
3.13.Sub Crossover has 12,24,48 dB and full options. 0 or 180 phase switch on sub out.
14.High pass, Sub, Bandpass 1&2 are addressable to front or rear Fader outputs.15.Low noise NE5532 IC’s16.Digitally controlled potentiometers and analog switches.Parametric Equalization Controls:
The DXE includes a fully adjustable parametric equalizer. With a parametric EQ you can select a center frequency, and apply the appropriate amount of boost or cut.
Digital-Hybrid Four-way Crossover:
With digital control, the four
The DXE has the ability to allow the user to set and store up to six different crossover profiles in individual memory loca tions. This memory is completely non- volatile, meaning you will never loose your setting even if the unit is disconnected from power for
2