X2 Level:
X2 Low:
X2 Hi:

Crossover 2 (X2)

High Pass = 115Hz-4900Hz Low Pass = 115Hz-4900Hz Band Pass Low= 16Hz-710Hz Band Pass High=115Hz-4900Hz 12dB per Octave

Crossover Mode;

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the X2 Mode:

Turn the knob either direction to Select; HIGH, LOW, BAND or FULL

Crossover Frequency

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the X2 HP: (High Pass) or X2 LP:(Low Pass)

Frequency.

Turn the knob either direction to raise or lower the Frequency.

Note: In High Pass or Low Pass the Band Pass frequency option will not be available for adjustment.

Band Pass Mode Frequency Adjustment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the

Turn the knob either direction to raise or lower the Frequency. Note: This will adjust the point this crossover begins to filter out the High Frequencies.

Tap the Select button until you reach the

Turn the knob either direction to raise or lower the Frequency. Note: This will adjust the point this crossover begins to filter out the Low Frequencies.

Gain Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Gain Menu.

Tap the Select button until you reach the

Turn the knob either direction to increase or decrease the Gain.

Source Assignment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Source Menu.

Tap the Select button until you reach the X2 SRC:

Turn the knob either direction to set the High Pass as Front or Rear.

14