ARC Audio DXE 3:X2 (HP), 5:Preset:, Sub Phase:, 1:Freq Menu, 2:Gain Menu, 3: Range menu, X2 Mode: High, X3 Mode: Band, 1:Sub: 65.4 Hz, HP Slope: 24dB, HP Range: High

The DXE Menus

1:Freq Menu1:Sub: 65.4 Hz2:X2 HP 0115 Hz3:X2 (HP)4:X3 Hi: 3508 Hz5:X3 Low: 0075 Hz6:HP: 3508 Hz RH2:Gain MenuX2 Level: -04dBX3 Level: -00dBCtr level: -90dBSub Level: +10dBHP Level: -00dB3: Range menuX2 Mode: HighX3 Mode: BandSub Slope: 24dBHP Slope: 24dBSub Phase: 0HP Range: High4:Source menu X2 SRC: REAR X3 SRC: FRONT SUB FRONT+REAR HP SRC: FRONT5:Preset: 2

The Frequency Menu adjusts all the crossover points that are available in the current configuration.

In this example X2 is in high pass so the Low frequency is not displayed.

All output gains are adjusted here. The Sub Level has a +10db boost. All the remaining output level range from –90dB to –00dB.

In the Range Menu you select crossover types and slopes. You can also change the sub phase 0 or 180.

Select Front or Rear output. This sets the fader control from the EQ. Only the Sub channel has the Front + Rear option.

To change to a new preset turn the rotate the knob to bring up the preset you wish to use then just tap the button once.

When the menu changes the old settings will be saved automatically.

17