The Crossover Display

1.The Plug: This is a 10-pin flat wire cable. Do Not mistake it for the 8 pin Balanced Line cable. It won’t work.

2.The Knob: This is a rotary encoder. All adjustments to the crossover are made here. It doesn’t have a stop. It will keep turning until your fingers get tired.

3.16 Character Display: All your crossover information is displayed here. The menus are designed to be simple to understand but with only 16 characters to work with we had to abbreviate.

4.Menu Select Button: Use this Button to switch between menus and selections. Holding the button down for 2 seconds will switch to the next menu group. A quick push tap will select a new menu item.

6