Before making connections
Before connecting your equipment it is important to think about the following points, as these will affect your choice of connections and subsequent use of the system.
Audio
Wherever possible, connect both analogue and digital outputs of digital sources. This enables use of a digital input for the main zone with the corresponding analogue input used for recording onto an analogue tape deck or VCR, or for the Zone 2 output.
Video
The AVR250 allows for conversion between different video formats. This means that the AVR250 can convert between composite,
For example, if you are watching a composite input from a VCR, you may view it from the
However, neither the record loops nor Zone 2 work from the video converter. This means that to record a
The video quality hierarchy is as follows:
nComponent/RGB – highest
n
nComposite – lowest
If all the video inputs are connected simultaneously from one device, e.g., a DVD player, the AVR250 will select automatically the best format available.
Zone 2
A
For these reasons, we recommend that source devices that have a digital connection are also connected to the analogue inputs. High quality YUV/RGB and
English
Inserting the batteries into the remote control
The remote control requires 2 ‘AAA’ batteries to operate. To insert the batteries into the remote control, please follow these instructions:
1.Open the battery compartment cover on the back of the remote control.
2.Insert two AAA batteries into the battery compartment, following the polarity indications given inside the compartment itself.
3.Close the cover.
Notes on inserting the remote control batteries
n Incorrect use of batteries can result in hazards such as leakage and bursting.
n Do not mix old and new batteries together.
n Do not use different kinds of battery
n Ensure that the plus (+) and minus
n Remove batteries from equipment that is not going to be used for a month or more.
n When disposing of used batteries, please comply with governmental (or other) regulations that apply in your country or area.
Using the remote control
Please keep in mind the following when using the remote control:
n Ensure that there are no obstacles between the remote control and the remote sensor on the AVR250. The remote has a range of about 7 metres. (If the remote sensor is obscured, the remote control input jack on the rear panel is available. Please contact your dealer for further information.)
n Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the AVR250.
n Replace the batteries when you notice a reduction in the operating range of the remote control.
�
�
A. Open the cover of the remote control
battery compartment
B. Insert the batteries into the remote
control
�
�
C. Close the cover of the remote control
battery compartment
AVR250