Technical specifications
Analogue audio inputs
Line input sensitivity | 0.5/1/2/4V rms (2V rms normal) |
|
|
Overload margin | +2dB |
|
|
Input impedance | >22kΩ |
|
|
Analogue audio outputs |
|
|
|
Level (at 0dB gain) | 2V rms |
|
|
Maximum level | 3.5V rms |
|
|
Impedance | 600Ω |
|
|
Signal/Noise ratio (analogue input) | 100dB unweighted (measurement bandwidth 22kHz) |
|
|
Signal/Noise ratio (digital input) | 100dB unweighted (measurement bandwidth 22kHz) |
|
|
THD+N (analogue input) | 90dB (0.003%) (measurement bandwidth 22kHz) |
|
|
THD+N (digital input) | 90dB (0.003%) (measurement bandwidth 22kHz) |
|
|
Frequency response | |
|
|
Headphone impedance | 390Ω |
|
|
Power amplifier |
|
|
|
Continuous power output (4 or 8Ω) |
|
|
|
any 2 channels driven | 90W |
|
|
all 7 channels driven | 70W (1kHz @ 0.2% THD) |
|
|
THD at 80% rated power output | 0.02% (at 1kHz) |
|
|
Video inputs and outputs |
|
|
|
Input and output impedance | 75Ω |
|
|
Composite video level | 1V |
|
|
HF response to | 12MHz |
|
|
1V/0.28V | |
|
|
HF response to | 12MHz |
|
|
HQ (component) video |
|
|
|
level (Y/Cr/Cb) | 1V/0.5V/0.5V |
|
|
level (R/G/B) | 1V/1V/1V |
|
|
HF response to | 150MHz |
|
|
Digital audio inputs |
|
|
|
Coaxial connection (level/impedance) | 0.5V/75Ω |
|
|
Acceptable sampling frequencies | 44.1kHz, 48kHz and 96kHz |
|
|
Digital output level/impedance | 0.5V/75Ω |
|
|
Trigger outputs |
|
|
|
Output D.C. voltage level | 12V ±1V |
(excl. RGB status) |
|
|
|
Allowable load | 30mA max. (min. 400Ω) |
|
|
Remote inputs and output |
|
|
|
Signal | modulated 36kHz carrier |
|
|
Coding | Philips |
|
|
General |
|
|
|
Mains voltage | 110V and 230V (switchable) |
|
|
Power consumption (maximum) | 1200VA |
|
|
Dimensions W x D x H (including feet) | 433 x 420 x 145mm |
|
|
Weight (net) | 16.2kg |
|
|
Weight (packed) | 21.4kg |
|
|
Supplied accessories | Mains lead, CR80 remote control, 2 x AA batteries |
|
|
E&OE. All specification values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
Radio interference
The AVR250 is a digital audio device which have been designed to very high standards of electromagnetic compatibility.
The unit can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the AVR250 player and its connecting cables as far from the tuner and its aerials as possible. Connecting the AVR250 and the tuner to different mains sockets can also help to reduce interference.
EU COUNTRIES – These products have been designed to comply with directive 89/336/EEC. USA – These products comply with FCC requirements.
AVR250
