specifications
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
Continuous power output, per channel, 8Ω
2 channels driven, 20Hz ‑ 20kHz, <0.02% THD | 100W |
2 channels driven, 1kHz, 0.2% THD | 125W |
7 channels driven, 1kHz, 0.2% THD | 90W |
Residual noise & hum | <0.3mV |
Inputs |
|
Line inputs: |
|
Nominal sensitivity | 1V, 2V, 4V (user adjustable) |
Input impedance | 47kΩ |
Signal/noise ratio (CCIR, 100W) | 100dB |
Preamplifier outputs |
|
Nominal output level | 1V RMS |
Output impedance | 560Ω |
THD+N | |
Video inputs |
|
Component video signal/noise | 85dB |
Composite video signal/noise | 70dB |
Headphone output |
|
Maximum output level into 32Ω | 2Vrms |
Output impedance | <5Ω |
General |
|
Mains voltage | |
Power consumption (maximum) | 1.5kW (Thermal dissipation approx. 5200 BTU/hour) |
Power consumption (idle, typical) | 100W (Thermal dissipation approx. 340 BTU/hour) |
Power consumption (standby) | <0.5W |
Dimensions | 433 x 425 x 171mm |
W x D (including speaker terminals) x H (including feet) |
|
Weight (net) | 15.5Kg |
Weight (packed) | 20Kg |
Supplied accessories | Mains lead |
| CR102 remote control |
| 4 x AAA batteries |
| Manual |
| DAB aerial |
| FM aerial |
| AM loop aerial |
| Calibration microphone |
E&OE
Note: All specification values are typical unless otherwise stated.
