front panel
operation
Input
These buttons select the source connected to the corresponding input (or internal input)
Unused sources can be prevented from being selected in the setup menu.
|
|
| Direct |
|
| Mode |
| Stereo Direct on/off. Provides a direct analogue path from | |
|
| the analogue inputs to the left and right front outputs. | ||
Selects between Stereo and the available |
| Switches off any surround processing modes and shuts | ||
surround modes for the current source. |
| down the DSP circuits for best stereo sound quality. | ||
|
|
|
|
| Display |
|
|
|
| ||||
|
| Info |
| This switches the display brightness |
|
|
| ||||||
Selects the information displayed on the |
| between off/dim/bright. |
|
|
| ||||||||
lower left portion of the front panel. |
|
|
|
|
|
|
|
|
| ||||
| OK |
|
|
| Zone |
| Power / Standby LED | ||||||
|
|
| Selects between Zone 1 and | ||||||||||
|
|
|
|
|
|
|
|
| |||||
Used to enter selections made in the | This indicates the status of the receiver and is | ||||||||||||
|
| Zone 2 control. | |||||||||||
Setup menu. Press and hold to reset |
|
|
|
|
|
| green when the AVR400 is powered on. Red | ||||||
video outputs to the lowest resolution |
|
|
| Mute | indicates the AVR400 is in Standby mode. | ||||||||
(HDMI: 480p; Component 480i). |
|
|
|
|
|
|
|
|
| ||||
|
|
| Mutes all analogue audio outputs in the |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| currently selected zone. |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Volume
Adjusts the analogue output volume in the selected zone (line out, speakers and headphones).
|
|
| Power | |
|
|
| ||
|
|
|
|
|
4 |
|
| Switches the main power to the | |
|
| |||
|
|
| AVR400 on and off. | |
|
|
| ||
|
|
| ||
|
|
| Once the unit is switched off, | |
|
|
| ||
|
|
| ||
|
|
| it should be left for at least ten | |
|
|
| ||
|
|
| ||
|
|
| seconds before switching on | |
|
|
| ||
|
|
| ||
|
|
| again. | |
|
|
| ||
|
|
| Aux |
| Phones |
|
| |
|
| Multi purpose auxiliary | This socket accepts headphones |
| ||||
|
| line level input, | with an impedance rating between | Remote control receiver. This is positioned behind | ||||
|
| calibration microphone | 32Ω and 600Ω, fitted with a 3.5mm | |||||
Menu | the display window, above the MENU button on the | |||||||
input and 3.5mm optical | stereo jack plug. | |||||||
front panel. Ensure the receiver is in a clear line of | ||||||||
|
| digital (SPDIF) input. |
|
| ||||
Selects the Setup menus on the |
|
| sight from the remote control for operation. If this is | |||||
|
|
|
|
| not possible, use a separate sensor connected to the | |||
|
|
|
|
|
|
| Z1 IR input on the rear panel. | |
|
|
|
|
|
|
|
| |
