Arcam P35, A32 manual Technical specifications, Continual Improvement Policy

Technical specifications

		A32	P35
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω	, 20Hz—20kHz	100W	100W
Single channel, 8Ω	, 20Hz—20kHz	150W	150W
Both channels, 4Ω	, 20Hz—20kHz	140W	140W
Single channel, 4Ω	, at 1kHz	200W	200W
Three channels, 8Ω	, 20Hz—20kHz	–	90W
Harmonic distortion, 80% power, 8Ω at 1kHz		0.005%	0.005%
Inputs
Phono cartridge:
Input sensitivity		2.7mV (MM); 270µV (MC)	–
Input impedance		47kΩ (MM); 300Ω (MC)
Signal/noise ratio (CCIR)		–79dB (MM); –73dB (MC)
Overload margin		35dB	–
Line and tape inputs:
Nominal sensitivity		250mV—2V	800mV
Input impedance		22kΩ	22kΩ
Signal/noise ratio (CCIR)		–103dB	–110dB
Tone controls, max. boost/cut		±12dB @ 80Hz and 12kHz	–
Power amplifier input
Nominal sensitivity		800mV	800mV
Input impedance		22kΩ	22kΩ
Gain		31dB	31dB
Preamplifier output
Nominal output level		700mV	–
Maximum output level		8V RMS	–
Output impedance		<50Ω	–
Headphone output
Maximum output level into 600Ω		8V	–
Output impedance		100Ω	–
General
Mains voltage		230V±12%; 115V±12%	230V±12%; 115V±12%
Power consumption (maximum)		800VA	800VA (950VA for P35/3)
Power consumption (standby)		2VA	2VA
Dimensions W x D x H (including feet)		430 x 370 x 110mm	430 x 350 x 110mm
Weight (net)		10.8kg	9.5kg (10.5kg for P35/3)
Weight (packed)		13kg	12.5kg (13.5kg for P35/3)
Supplied accessories		mains lead	mains lead
		CR-389 remote control
		2 x AAA batteries

E&OE

CONTINUAL IMPROVEMENT POLICY

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

NOTE: All specification values are typical unless otherwise stated.

14