So, if the IP addresses assigned in your network use 192.168.001.xxx and the last three digits of 101 have not been assigned to any other device, you do not need to change the IP address already assigned during manufacture. Attention: Your operating system may not display zeros, i.e. the entry on your PC can also be 192.168.1.1 (instead of 192.168.001.001). If you want to change the IP address of the DAR300 because of your network configuration:
Select "IP Address" and press OK.
Press | or to go to the digits you want to change and enter the |
desired digits using the number blocks on the remote control. | |
Press | and confirm by pressing OK. |
Press | . A window is displayed with the question "Accept |
changes?"
Press Yes to confirm the changes. Press No to discard the changes. Press OK.
Press to set the parameters.
Subnet screen
The IP address can only be entered if the Auto Config setting is "Off".
The default setting is 255.255.255.000. This setting is used in nearly all networks.
Press to set the parameters.
Gateway
The IP address can only be entered if the Auto Config setting is "Off". The connection to the Internet title database or Internet radio stations takes place via the gateway. The IP address of your DSL router should be entered here.
The default setting is 192.168.1.1. This setting is used in nearly all networks.
Press to set the parameters.
DNS server
The IP address can only be entered if the Auto Config setting is "Off".
Enter the IP address of the DNS server. Press to set the parameters.
Hostname
The default setting is "DAR300".
Devices can be identified on the network by their IP address and their hostnames (e.g. using the "Browse computers" search function in Windows XP).
The hostname can also be used to establish a network connection under Windows:
Explorer
\\DAR300\Music.
You should use a DHCP server for the configuration of your network, if you want to establish a connection to the DAR300 instead of the IP address for the hostname.
42