Battery Installation
1.Open the battery door.
2.Please place two AA alkaline batteries according to the pole directions for
batteries indicated on the battery door.
3.Close the battery door. Note:
When you use the USB cable to connect the camera with a computer, it is unnecessary to use the batteries because the camera use the power provided by the computer.
Warning:
1.Don’t open the battery door at will, otherwise, the power cut will cause the photos missing in the camera.
2.If you don’t use the camera for a long time, please take out of the batteries for fear of the discharging or corrosion of the batteries.
3.Please don’t put the batteries into fire for fear of explosion and hazard to environment.
4.Please download photos to your computer as soon as possible in order
to avoid photos lost.
Automatically enter the energy saving status
If the camera is not used in 60 seconds, the camera will automatically enter the energy saving status.
Low Battery Alarm
When the batteries are becoming depleted, LCD will blink, then you should download all photos into your computer immediately. Otherwise, all photos will be lost from memory.
- 2 -
