Argus Camera DC1620 manual Appendix 2 Answers of Frequent Asked Questions

Models: DC1620

1 17
Download 17 pages 42.56 Kb
Page 15
Image 15

Appendix 2: Answers of Frequent Asked Questions

1.Q: When I finish the standard software install processes, there is an icon showing “no photos in cameras” after downloading.

A:First make sure that you’ve completed shooting. In checking the total photo numbers shown on the camera’s LCD panel, please check whether the USB cable is loose or not. If it does not work please do the following steps:

(1)Please enter StartSettingControl PanelSystemHardware and then Device Manager (a route under Microsoft Windows 2000).

(2)Please press right key / Hardware Change Scanning, and then the system will execute automatic search.

(3)Please download photos again.

2.Q: The camera can’t work after connection, there’s a yellow mark “!” shown at Device Manager / Imaging Devices / Argus Digital Camera.

A:There may be a collision with computer’s peripheral devices. Please follow the steps below:

(1)Select Argus Digital Camera in [Device Manager] and press right key / Uninstall

(2)Remove USB cable

(3)Restart computer

(4)Reinsert USB cable

3.Q: After finishing installing software and connecting the camera to the computer, there’s “unknown USB device” in Device Manager.

A:Please check your camera has been connected well with your computer. If OK, please do the following steps:

-14 -

Page 15
Image 15
Argus Camera DC1620 manual Appendix 2 Answers of Frequent Asked Questions