Ariens 30SB, 36SB, 45SB - page 13

9
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST Snow Blower
V8.10.25.12
Assembly Instructions
Step 1: Control Panel Handles
1. Align the two holes on each side of the control panel
handles over the lower handle frame.
2. Insert the bolts through the handlebar holes and frame
holes. Secure in place with hardware provided. All bolt
heads must face to the inside.
Step 3: Chute Rotation
Attach the cable coming from the middle of the
control panel by screwing the cable end onto the
crank section. See next page for specific details.
Need Help With Assembly?
(919)-550-3221
Step 2: Directional Discharge Chute
1. Fit round spacer onto impeller housing before installing chute.
Apply light coat of grease onto spacer.
2. Install the bolts for the retainer brackets with the plastic
spacer between the chute and the steel retaining tabs.
DO NOT OVERTIGHTEN. If the bracket is too tight the chute
will not move properly. Ensure there is enough space
between the impeller housing and the bracket on all sides
so that the chute rotates smoothly.