■Assembly of the left LED PCB and right LED PCB
LED(L) PCB Ass'y
LED Light Guide Sheet(L)
LED PCB(L)
LED(R) PCB Ass'y |
| |
Match the edge and attach it. | ||
| ||
LED Light Guide Sheet(R) | ||
Match the edge and attach it.
Avoid running over the LED.
Back side 
0
3mm
LED PCB Tape(L)
LED(L) FPC
Match the edge and attach it. Ensure it does not come over the end of the Board by 0.5 mm or more. Avoid coming over it.
9.2.9.Setting the Power SW PCB
1.Connect the Cable to the Connector. (CN9)
2.Fix the Power SW PCB using the Screw. <N1>
Screws <N1> : DFHE5025XA
■Assembly of the Power SW PCB
(Note) Arrow without specified measurement: 0 to 0.5 mm
Power SW PCB
0
1mm 
Power Spring Sheet | 0 1mm |
Attach
Insert
Spring 
Insert it to Knob and |
|
Pin on the Top Case | Insert the Cushion |
| |
| between the ribs. |
| Avoid coming over |
S2
Screw
Fold the board back and fix with screw.
LED PCB(R)
LED PWB Tape(R)
Match the edge and attach it.
<N1>
Connector(CN9)
Power SW
PCB
Safety Working
CAUTION | S1:Insulation S2:Pinching Cables S3:Sharp Edge |
S4:Part No. Check S5:Others |
47 / 90
