■Assembly of the Pad PCB and SW PCB
(Note) Arrow without specified measurement: 0 to 0.5 mm
PAD PWB ASSY
PAD PWB
SW FPC
Insert
LED(R) FPC 
|
|
| Insert |
PAD MAIN FPC ASSY | Back side | Power SW Cable | |
| |||
No direction when inserting |
|
| |
| Power Cable Cushion | Insert | |
Wrap around the Cable.
Use the fixing JIG for the pressured portion when the cables are inserted.
8 
2mm
Thermistor
Insert to the connector
PAD MAIN FPC Ass'y
Stiffening Plate Side
Fold back |
|
|
| 0 | 1mm |
0 | 1mm |
|
Tape |
|
|
SW PCB Ass'y
Operation Tape
Match the edge and attach it.
Avoid coming off of the LED part, or running over the LED part.
Ensure that the direction is right when attaching. The Connector bracket is on the back side.
SW PCB
Operation
Sheet
■Putting of the TP Bottom Tape
Front side
Screw
SW PCB Ass'y
Match to the upper left corner. 0 to 0.5mm
Screw
9.2.8.Setting the left LED PCB and right LED PCB
1.Connect the Cable to the Connector. (CN806)
2.Fix the left LED PCB.
3.Connect the Cable to the Connector. (CN801)
4.Fix the right LED PCB.
5.Attach the two Release Papers.
6.Attach the Palm Rest Ass'y.
Release Paper
Release Paper
left LED PCB
Connector(CN806) |
right LED PCB |
Connector(CN801)
46 / 90
