14.Remove the 2 Screws <N19>, and remove the DIMM Holder.
Tape
<N19>
<N19>
<N19>
Screws <N2> : DFHE5058ZB
Screws <N9> : DRSB2+5FKL
9.1.11.Removing the Power SW PCB
<N1>
Connector(CN9)
<N19>
Connector(CN9)
Connector(CN14)
<N19>
Power SW PCB
Connector(CN23) | Main PCB |
Combo Socket
15.Remove the Tape.
16.Disconnect the 3 Cables from the 3 Connectors. (CN9,CN14,CN23)
17.Remove the 7 Screws <N19>, and remove the Main PCB and Combo Socket.
Screws <N3> : DFHE5108ZA
Screws <N8> : DRSB2+10FKL
Screws <N9> : DRSB2+5FKL
Screws <N19> : XSB2+3FNL
9.1.10. Removing the I/O PCB Ass'y
<N9>
I/O PCB Ass'y | <N9> |
|
<N2>
<N2>
<N2>
<N2>
1.Remove the 4
2.Remove the 2 Screws <N9>.
3.Remove the I/O PCB Ass'y.
1.Remove the Screw <N1>.
2.Disconnect the Cable from the Connector (CN9).
3.Remove the Power SW PCB.
Screw <N1> : DFHE5025XA
9.1.12.Removing the left LED and right
LED PCB
Release Paper
Release Paper
left LED PCB
Connector(CN806)
right LED PCB
Connector(CN801)
1.Remove the two Release Papers.
2.Disconnect the Cable from the Connector (CN806).
3.Remove the left LED PCB.
4.Disconnect the Cable from the Connector (CN801).
5.Remove the right LED PCB.
27 / 90