■Line Processing of Antenna Cable of Main Unit
Cable Process 1/3
Place brown/blue/gray cables at left and white/black cables downward.
After connecting the white antenna cable, connect it into the Holder as illustrated.
Safety Working
|
|
|
| CAUTION | S1:Insulation S2:Pinching Cables S3:Sharp Edge | ||
|
|
|
| S4:Part No. Check S5:Others | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Attach side |
Cable Process 2/3 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After connecting the black antenna cable, connect it into the Holder as illustrated.
Connect the blue antenna cable.
| Insert the FPC, | |
| Lock Check | |
|
| |
TAPE |
|
After processing the cables, inserting the FPC and locking, incline the Audio PCB into the arrow direction.
After confirming the cable is not under the AUDIO PCB (processed at the Step 4), tighten the Screws. Because there is a possibility that the cable is scissored between PCB and the both.
SHEET
Remove the release paper and attach it.
To prevent from the cable damaged by screw head.
Process the grey cable to the same direction with the brown cable
S2 | Insert it into the right |
| notch of the Clamper. |
If the fixing is not incorrected, there is possibility
that the cable is scissored between the PCB and the both.
Check the blue cable from the hole.
Connect the FPC
Screw
Screw
Remove the Release Paper and attach it.
To prevent from the cable damage by screw bead.
57 / 90
