9 Disassembly/Reassembly
Note:
Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
9.1.Disassembly Instructions
9.1.1.Preparation
Before disassembling, be sure to make the following prepara- tions.
ï Shut down Windows and turn off the power. |
ï Disconnect the AC adaptor. |
ï Remove the optional DIMM memory card and PCMCIA card |
if they are connected. |
HDD Case B
Hooks
HDD FPC
HDD
Hooks
ï Remove other devices if they are connected. |
Attention:
ïPlease execute writing BIOS ID when you exchange the Main Board.
ïParts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.
9.1.2.Removing the Battery Pack and HDD Pack
Heater
<N13>
<N13>
HDD Case A
1
2
| 5. | Remove the two Screws <N13>. |
| 6. | Remove the HDD Case A and the HDD Case B. |
3 | 7. | Remove the HDD |
Screws <N13> : DXQT2+D4FNL
9.1.3. Removing the Touch Pad and Key- board
KBD Plate
| <N9> |
|
| <N9> | KBD Plate |
|
| |
Palm Rest Ass'y |
| <N9> |
| <N9> | |
|
|
HDD Pack
Battery Pack
1. Open the Battery Cover. 2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.
1. Remove the Palm Rest Ass'y.
Note:
The Palm Rest Ass'y is firmly fixed with
Carefully remove the Palm Top Cover Sheet not to damage it.
2. Remove the 4 Screws <N9>.
3. Remove the KBD Plate.
23 / 90
