■Line Processing of Antenna Cable and LCD Cable Safety Working
CAUTION | S1:Insulation S2:Pinching Cables S3:Sharp Edge |
S4:Part No. Check S5:Others | |
Step1 | Step2 |
| Cable Holder |
Install the Holder and Cable guide on the Hinge as shown in figure.
Cable Guide HInge
Cable Holder
Insert the cables into the Cable Holder as shown in figure. <CAUTION>:Position of the Antenna Cables
Right side of LCD Cable:White/Gray Left side of LCD Cable:Blue/Black/Brown
Keep margin in cable length
It prevents to break of the cable
Step3
Red marking is on the holder
Black marking is on the holder
S2 Fit Holders as shown in figure
(Until you hear the click)
Watch out is the cable comes off from the holder
for cable is not scissored between the holder and hinge.
Step4
S5
LCD cable proccess space
ANT cable proccess space
Wrap (one round) only the Antenna Cables around
the axis of the Hinge as shown in figure.
Note: Handle LCD cable as show in figure. LCD cable must not intersect with Antenna Cables.
CAUTION:Check the position of the Cables
Step5
Next, wrap (one round) the LCD Cable around the axis of the Hinge as shown in figure.
Step6 |
OK |
It prevents to break of the cable
S5
NG |
The antenna cables must not intersect with the LCD cable.
39 / 90
