INSTALL BAGS

Install Bags on Catcher Frame

CAUTION: Make sure the heat resistant side (smooth side) of the mesh bags faces the unit.

1.Install the mesh xl bagger bags (item 15) on bagger cover assembly (item 9) with the heat resistant side (smooth side) of the bags facing the unit.

9

15

Install grass bags so the smooth, heat resistant side faces the unit.

Figure 10

INSTALL BLOWER ASSEMBLY

NOTE: The complete blower assembly installs with a combination of parts provided in the blower mount kit and in this bagger kit and with parts originally installed on the unit. Make sure you have all hardware available when installing the bagger kit and blower assembly.

Install Bagger Adapter Kit

IMPORTANT: Follow the detailed instructions provided in the bagger adapter kits. General instructions are given here in case the instruction sheet gets lost.

1.Inspect the anti-scalp roller bracket and cut a mounting slot if necessary.

2.Install the pump mounting bracket on the blower assembly (item 19).

3.Install the blower assembly (item 19) on the deck and secure it with the knob supplied in the blower mount kit.

Blower assembly and mounting bracket.

Round Head

Wing KnobSquare Neck

Spacer Bolt

Wing Knob

Spacer

 

 

Round Head

Square Neck Bolt

Figure 11

4.Install the blower belt supplied in the bagger mount kit on the top pulley of the deck spindle and on the blower pulley as shown in Figure 11.

NOTE: Notice where the belt twists.

13