2. DANGER ROTATING PARTS
Always keep feet and hands away from rotating parts.
OL3030
Never direct discharge towards persons or property that may be injured or damaged by thrown objects.
OL0910
Keep people away from unit while operating.
OL4140
Shut off engine, remove key, read manual before you adjust or repair unit.
OL4010
NO STEP! Always keep feet away from rotating parts.
OL4420
3. KEEP GUARDS IN PLACE
| Do not operate mower unless guards are in |
OL4430 | operating position or bagger is attached. |
|
OL3320
4. DANGER!
To Avoid Serious Injury
DO NOT operate mower unless guards are in place or grass pump and entire bagger are attached.
OL4840
ALWAYS wear adequate hearing protection.
OL4690
ROTATING FAN! Stop engine and remove key before clearing.
Wait for all moving parts to stop.
OL0900
Keep children and others away from unit while operating.
OL4140
5. DANGER ROTATING PARTS
Avoid Injury – Stay clear of rotating parts.
6. DANGER! HOT SURFACES
DO NOT TOUCH parts which are hot from operation. Always allow parts to cool.
OT1281
7.CAUTION!
•Bag is subject to wear and deterioration.
•Check bag frequently, replace when necessary.
•Use original bag to comply with safety specifications.
Do not operate on slopes over 10°.
Installing the blower assembly on your mower requires the removal of the discharge chute and belt guard. Retain discharge chute, discharge chute hardware, belt guard, and belt guard hardware in a safe location and reinstall whenever operating unit without the blower assembly. DO NOT operate mower unless guards are in place or blower assembly and entire bagger are attached.
NEVER operate bagger if the unit’s safety interlock system is not working properly.
Always be aware of maximum sweep of bagger when turning. Always allow adequate clearance between bagger, personnel and other objects when turning.
As grass catcher fills, be alert to changing unit stability and control.
Always install counterweights before operating unit with bagger attached. Always remove counterweights when bagger is removed from the unit.
Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury.
Complete a walk around inspection of unit and work area to understand:
•Work area
•Your unit
•All safety decals
Determine which attachments are needed and can be used safely.
Inspect unit before each use for: missing or damaged decals and shields, correctly operating safety interlock system, and deterioration of grass bagger. Replace or repair as needed.
4