1. WARNING!

3. DANGER!

Read Owner/Operator Manual.

OL1801

Keep people away from unit while operating. Keep children out of work area and under watchful care of a responsible adult.

OL4370

Never direct discharge towards persons or property that may be injured or damaged by thrown objects.

OL0910

Stop engine, remove key, read manual before making any repairs or adjustments.

OL4010

Wear appropriate hearing protection.

OL4690

ONLY use clean-out tool to clear blockages. NEVER use your hands.

ROTATING PARTS.

Keep clear of auger while engine is running.

 

Read Operator’s Manual.

 

• Allow operation only by

OS2080

properly trained adult,

 

 

 

 

never children.

 

• Stop engine and remove

 

 

ignition key prior to leaving

 

 

the operator’s position for

 

 

any reason.

 

• Keep all controls, guards

 

 

and safety devices properly

 

 

serviced and functional.

 

Never direct discharge

 

 

towards persons or

property that may be injured or damaged by thrown objects.

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include exhaust and evaporative emissions control system components required to meet U.S. Environmental Protection Agency (EPA) and/or California Air Resources Board (CARB) regulations. Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by an Ariens Company dealer or an authorized engine manufacturer's service center. Contact your Ariens Company Equipment Retailer concerning emission controls and component questions.

2. DANGER!

ROTATING PARTS! ONLY use clean-out tool to clear blockages. NEVER use your hands. High

speed impeller rotates below

discharge opening. Wait for all

OS6610 moving parts to stop before removing clogs or servicing.

SAFETY RULES

Read, understand, and follow all safety practices in owner/operator manual before beginning assembly or operating. Failure to follow instructions could result in personal injury and/or damage to unit.

ALWAYS remove key and/or wire from spark plug before assembly, maintenance or service. Unintentional engine start up can cause death or serious injury.

Complete a walk around inspection of unit and work area to understand:

• Work area • Your unit • All safety decals

ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.

GB - 5