ASSEMBLY

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

WARNING: Dropping or tipping over boxed unit could result in personal injury or damage to unit.

PACKAGE CONTENTS

4

3

 

2

1

1.

Sno-Tek™ Unit

4. Literature Pack

2.

Discharge

with Extra

 

Chute

Shear Bolts

3.

Chute Crank

 

Figure 3

ASSEMBLY

Tools Required:

•Pliers

•Open-end wrenches: 3/8, 7/16, 1/2, 9/16 in. and/or adjustable wrench

•Tire gauge

Unfold Handlebar

(Figure 4)

1.Remove the lower and loosen the upper hardware on the handlebar assembly.

2.Loosen the hardware on the shift rod.

3.Put the speed selector lever in the sixth forward position.

4.Rotate the handlebars into operating position.

NOTE: Be careful not to damage cable spring hooks when rotating handlebars upward.

5.Install and tighten the hardware on the handlebar assembly and shift rod.

.

1 3

2

4

1.Shift Rod

2.Upper and Lower Handlebar Hardware

3.Shift Rod Hardware

4.Handlebar

Figure 4

GB - 8