Ariston OK 997E LDP AUS S Cooking modes, Restoring the factory settings, Standby, Oven light

Models: OK 997E LDP X AUS S OK 997E LDP AUS S OK 999E LDP AUS S OK 999EL S D P X AUS OK 999EL S D P AUS OK 999E LDP X AUS S

1 20
Download 20 pages 4.67 Kb
Page 10
Image 10
Oven light

panel and the oven door, as well as towards the bottom of AUS the oven door.At the beginning of the FAST CLEAN mode,

the cooling fan operates at low speed.

!Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently.

Oven light

The light comes on when the oven door is opened or when a cooking mode starts.

When models featuring LED INSIDE technology begin cooking, the LEDs on the door light up for improved illumination of all cooking levels.

The

button can be used to switch on the light at any time.

Residual heat indicators

The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” light on the display comes on to indicate high temperatures inside the oven cavity. The indicator light switches off when the inside of the oven has cooled down.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by the user (clock and customised durations). To carry out a reset, switch off the oven, then

keep the SELECTOR knob turned while pressing the Residual heat indicators icon for 6 seconds. Once the restore procedure is complete,

a buzzer will sound. The first time the icon is pressed,

the oven will behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the latest European Directive on the limitation of power consumption in standby mode. If no buttons are pressed for 30 minutes and the control panel/door lock has not been activated, the appliance automatically reverts to standby mode. The standby mode is visualised by the high luminosity “Watch Icon”. As soon as interaction with the machine resumes, system operation is restored.

Starting the oven

1.Switch the control panel on by pressing the Restoring the factory settings icon. The appliance buzzer sounds three times (ascending) and all buttons light up in sequence.

2.Select the desired cooking mode by turning the SELECTOR knob. The TEMPERATURE display shows:

- the temperature associated with the mode, if programming manually;

- “Auto”, if programming is automatic. The TIME display shows:

- the current time, if programming manually; - the duration, if programming is automatic.

3.Press the Standby icon to begin cooking.

4.The oven will begin its preheating stage: the preheating light flashes.

5.When the preheating process has finished, a buzzer sounds and the preheating indicator light shows that this stage has been completed: the food can then be placed in the oven.

6.During cooking it is always possible to:

-modify the temperature by turning the THERMOSTAT knob (manual modes only);

-set the duration of a cooking mode (see Cooking Modes);

-press the Starting the oven icon to stop cooking. In this case the appliance stores the temperature modified previously in its memory (manual modes only);

-switch off the oven by pressing the Cooking modes icon for 3 seconds. 7. In case of a blackout, if the oven was already operating, an automatic system within the appliance will reactivate the cooking mode from where it was interrupted as long as the temperature did not drop below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).

!There is no preheating stage for the BARBECUE mode.

!The oven will begin its preheating phase after 2 seconds from selecting the desired cycle

Cooking modes

!To guarantee perfectly soft or crispy food, the oven releases water contained within the food in the form of steam. This means it is possible to achieve optimal cooking results for all dishes.

!Every time the oven is switched on, it suggests the first

CREATION cooking mode.

!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

!Always place cookware on the rack(s) provided.

ExtraLarge Space

!Do not use position “D” for racks.

CREATION cooking modes

!All cooking modes have a default cooking temperature which may be adjusted manually to a value between 30°C and 250°C as desired (300°C for GRILL mode).CREATION cooking modes include all manual programmes.

The oven controls all essential aspects of each of these cooking modes and makes it easier for you to create the perfect dish, from the simplest recipe to the most sophisticated culinary delights: the temperature, heat source, humidity and fan assisted operation are all controlled automatically.

This chapter was written with the help of our very own

culinary expert. We invite you to follow his advice so you can benefit from his experience and perfect your cooking skills.

The recommended cooking modes, temperatures and

oven shelf heights reflect our expert’s own experience in

10

Page 10
Image 10
Ariston OK 997E LDP AUS S Cooking modes, Restoring the factory settings, Standby, ExtraLarge Space, Oven light