Ariston System A 24 RFF, System A 30 RFF 13. Electrical connections

28
13.1 Fitting the mechanical and digital time clocks
To fit the integral time clock it is necessary to proceed as
follows;
-Isolate the electical supply to the appliance;
- Remove the front panel as described in Section 18.1.1;
- Remove the plastic cover on the right hand side (Fig. 33)
and pull out the 4 wires (Fig. 34);
-Connect the time clock wires as follows;
MECHANICALMODEL (Fig. 44)
Red Wire - Contact 1
Black Wire - Contact 2
Black Wire - Contact 3
Grey Wire - Contact 5
NOTE: THETWO BLACK WIRES ON CONTACTS 2 & 3 CAN BE REVERSED
DIGITALMODEL (Fig. 36)
Red Wire - Contact 1
Black Wire - Contact 2
Grey Wire - Contact 3
NOTE:SECONDBLACK WIRE IS NOT CONNECTED.
- Push the clock back into the panel and refit the casing
panel (Fig. 37).
54321
GBR
321
GBR
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
13. Electrical connections (continued)