SMTP Server
SMTP server is to set for alarm triggering report via email format. When the criteria or
condition match on event from motion detection or alarm I/O or manual trigger, the image will
be captured and email to the destination accordingly.
SMTP server: Setting SMTP server IP address or domain name address – for example
mail.comcast.net or your ISP available SMTP server. Please note that SMTP is
support only regular standard access using TCP port 25. If you are not using IP
address for specify the SMTP server, your DNS server need to set correctly so
that SMTP name resolution to IP could be successful.
SMTP From: Sender mail address – for example xxx@xxx.com. It is to notice recipient the
sender information.
SMTP Authentication: enable or disable to verify the login security.
Username: enter user valid account name (in most case, you do not need to put “@xxx.com”)
Password: enter user valid password
Select “SAVE” to save the setting.
©2007 Asante Networks Inc., All rights reserved. NetCam are registered trademarks of Asante Network, Inc.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
49