Asante Technologies FR3002AL user manual Hardware Installation

2. Hardware Installation

This addendum is concerned with the installation and configuration of the wireless portion of the FR3002AL. Please refer to the FR3000 Series User's Guide for information on connecting the router to your ISP.

Please follow the steps below to install your wireless router:

1.Connect an Ethernet cable from the ADSL or cable modem port to the router’s WAN port.

2.Insert the wireless adapter card into the PCMCIA port on the back of the router (card is included with the FR3002AL-1PCM only).

Note: The card must be installed before powering up your com- puter or router.

3.Connect a computer to one of the LAN ports of the router using an Ethernet workstation cable.

4.Connect the power supply to the router and to a working grounded outlet.

5.Allow the router to perform its self-test before progressing to the next step. Please refer to the User’s Guide for information on the Power On Self Test (POST).

6.Once the router has completed the Power On Self Test (POST), it is ready to be configured. Proceed to the next sec- tion for information on configuring the wireless router.

FriendlyNET FR3002AL Wireless Router 7