Installation
Powering on the Switch
This section describes how to power on the FS4004DS and the FS4008DS Fast Ethernet Switch.
FS4004DS
The FS4004DS’s may be turned on with or without LAN segment cables connected.
To power on the FS4004DS:
1 Connect one end of the power cord (supplied) into the AC power connector on the FS4004DS’ back panel.
2 Connect the power cord to a local power source outlet.
Note: There is no power switch on the FS4004DS. The FS4004DS is automatically powered on as soon as the power cord is connected to the Switch and to a power outlet.
The FS4008DS’s power supply adjusts to the local power source automatically. .
FS4008DS
The FS4009DS may be turned on with or without LAN segment cables connected
To power on the FS4008DS:
1 Connect one end of the power cord (supplied) into the AC power connector on the FS4008DS’ back panel.
2 Connect the power cord to a local power source outlet.
3 Turn the power switch to the “on” position.
The FS4008DS’s power supply adjusts to the local power source automatically. .
Page
