Asante Technologies FS4004DS, FS4008DS user manual Cabling and Voltage Requirements

Installation

Cabling and Voltage Requirements

This section describes the cabling and voltage requirements of the Switch.

Cabling Requirements

100Base-TX requires data-grade (Category 5) UTP (unshielded twisted- pair) cable.

▲Important! Some installations have Category 5 cabling but do not have wall outlets and/or wiring closet punch-down blocks that meet Category 5 require- ments.

100Base-TX requires that all wiring and accessories meet EIA/TIA 568B specifications for proper operation. When wiring a 100Base-TX network, make sure that the entire cable plant meets specifications.

Voltage Requirements

▲Important! Check the AC power line voltage used in your area. The AC power adapter included with your Switch must match the power supply voltage used in your area.

❏AC input power: Equal to the AC power voltage used in your area

Page 2-4