Ashly 24.24M manual Output Block Definitions, Limiter, Gain Delay, Cross Point Mixer, Meters

Protea 24.24M Matrix Processor

Output Block Definitions

Output Card Four channels - all with full processing power in each channel

Up to 4 output cards may be installed for a total of 20 output channels!

Outputs Available Inputs

4	4,8,12,16,20
8	4,8,12,16
12	4,8,12
16	4,8
20	4

HPF - LPF
Set Crossover Frequencies - Choose from Bessel, Butterworth or	EQ
Linkwitz-Riley	15 Total - Choose from parametric, shelf or allpass. Adjust
Type 12 to 48dB/oct, steps =12, 18, 24, 48dB/oct, Butterworth,	frequency, level and Q
Bessel, LR, default =24dB/oct LR	Frequency 20Hz - 20kHz, 1Hz increments, default = 1kHz
Frequency 20Hz - 20kHz, off 1 Hz increments, default =Full Range	Level +15 to -30dB, 0.1dB increments, default = 0.0dB
	Q .016 to 4 oct., default = 1 oct. BW
	Type PEQ, 4 shelf types, Allpass,
	default = PEQ

			Limiter
			Protect your system from harmful audio peaks or keep output
			levels within a specified range
			Threshold +20dBu to -20dBu, 1dB increments, default = 0dBu
			Ratio 1 to inf steps = 1.2, 1.5, 2, 3, 4, 6, 10, 20, inf,
			default =10:1
			Attack .5 to 50ms/dB steps = .2, .5, 1, 2, 5, 10, 20, 50ms,
			default =5ms
			Release 10ms to 1000ms/dB
Gain	Delay		steps =5, 10, 20, 50, 100, 200, 500,1000ms,
			default =100ms
Set gain stage for	Set channel delay
			Link Channels On or off,
optimum level	max delay 682ms
			default =Not Linked
Gain +12 to -40dB,	Delay 0-682ms,
0.1dB increments,	.020833ms
default = -40.0dB	increments,
	default = 0ms
		Inputs may be
		routed to any
		output
		Bypass for HPF/
		LPF, Delay, EQ and
		Limiter
		Whole Channel
Cross Point Mixer		and Cross Point
Mix or mute any or all inputs separately to the output		Mixer Input
without affecting the input structure		Muting		Meters
Gain +12 to -50dB then -INF, 1dB increments, default =-INF				Monitor signal levels, Autoleveler gain, Limiter
				reduction, Gate, Ducker, and clip status
Mute on or off, default =Not Muted